Lennox C0CTRL70AE1L, Network Thermostat Controller Bypass Controller
Cat # : 11W31
Model/Part # : C0CTRL70AE1L
Quantity:
Product Overview
Lennox C0CTRL70AE1L Network Thermostat Controller Bypass Controller
Network Thermostat Controller Bypass Controller is a proportional and integral (PI) setpoint controller used for controlling the bypass damper for units using the Network Thermostat Controller for CAVB zoning applications. All setup and programming is done by DIP switches and jumpers. Set points may be local and/or remote. The output may be direct- or reverse-acting.
- Simple stand-alone operation.
- PI setpoint control.
- Setpoint potentiometer.
- DIP switch/jumper programming.
- Compatible with Damper Actuator C0MISC21AE1L (12W98).
- Compatible with Supply Static Differential Pressure Sensor C0SNSR20AE1 (78M19).
- Operating Environment: Temperature: 32° to 158°F
- Humidity: 10% - 95% RH, Non-Condensing
- Power Requirements: 24VAC (+/–10%), 50/60Hz, 3VA (Class 2 transformer required)
- Accuracy: +/- 1%
- Dimensions: (H x W x D) 4-5/8 x 4-13/16 x 2"
- Weight: 0.4 lbs.
- INPUTS / OUTPUTS: Local Set Point input 10K potentiometer
- Remote Set Point input: 4-20mA, 1-5VDC or 10K potentiometer
- Analog Output: 4-20mA for controlling bypass damper actuator.
- Compatible with Damper Actuator C0MISC21AE1L (12W98)
- Analog Inputs: 1-5VDC for Duct Static Pressure Sensor.
- Compatible with Supply Static Differential Pressure Sensor C0SNSR20AE1 (78M19)
- Cable Type: Analog Output - Two conductor thermostat cable 20AWG min.; Analog Input - 2 twisted pair shielded cable (2 Lennox yellow COMM cables):